Description
RTS-01 infrared temperature measurement scanning device
Product description
The infrared temperature measurement scanning device is used as a special protective device for cement kilns (rotary kilns), using non-contact temperature measuring instruments to respond to the operation status of the kiln in a timely manner by scanning the kiln carcass. When the kiln skin on the inner wall of the kiln falls off or the refractory bricks are damaged, it will cause the corresponding position on the shell, prompting the staff on duty to take corresponding measures in time and maintain the normal working condition of the kiln, increase the service life of the kiln, and extend the life of the kiln. The interval time of the second overhaul, so as to achieve the purpose of improving economic efficiency.
This device is composed of an infrared temperature measurement scanning detection system on site and a processing, display and printing system located in the control room. Since the entire scanning system is in an open-air environment with a high degree of dust, the entire system is in a sealed state, and airflow is used to prevent dust from entering from the observation port, thus ensuring the normal and safe operation of the instrument in harsh environments. The entire device is connected to the processing display and printing system in the control room through a cable. The system can be composed of two ways for users to choose first:
1. A dual-pen recorder with alarm is connected to record temperature and position signals. And can provide hot spot alarm.
2. Consists of a dedicated PC microcomputer and software system.
Specifications
This device is composed of scanning, detection and power supply. The detection part is composed of a probe (infrared radiation temperature detector) and a temperature transmitter.
Product technical data
1. Scanning detection system:
Measuring range: 0～600℃
Scanning range: 90°
Sampling speed: 10 times/sec
Sampling points: set by yourself
Detection distance: 9-20 meters (special requirements will be determined separately)
Detection target size: diameter 24 cm (at a distance of 9 meters)
diameter 58㎝ (at a distance of 20 meters)
Installation method: fixed installation
Electricity source: 220AC
Temperature signal measurement accuracy: 1.5 level (corresponding to the upper limit of the range)
Position signal measurement accuracy: 1.5 level (corresponding to the upper limit of the range)
Temperature signal output mode: 4～20mA (corresponding to 0～600℃ linear)
Position signal output mode: 4～20mA (corresponding to the linearity of the start and end positions)
2. Use recorder: record the position and temperature signal in real time, and alarm when a hot spot is formed.
3. Dedicated PC and printer
In addition to the functions of 2, it also has the following functions: color screen display temperature curve, kiln rotation speed, alarm time and hot spot location, memory historical data, and can increase the number of sampling detection channels for special requirements.
Product description
The infrared temperature measurement scanning device is used as a special protective device for cement kilns (rotary kilns), using non-contact temperature measuring instruments to respond to the operation status of the kiln in a timely manner by scanning the kiln carcass. When the kiln skin on the inner wall of the kiln falls off or the refractory bricks are damaged, it will cause the corresponding position on the shell, prompting the staff on duty to take corresponding measures in time and maintain the normal working condition of the kiln, increase the service life of the kiln, and extend the life of the kiln. The interval time of the second overhaul, so as to achieve the purpose of improving economic efficiency.
This device is composed of an infrared temperature measurement scanning detection system on site and a processing, display and printing system located in the control room. Since the entire scanning system is in an open-air environment with a high degree of dust, the entire system is in a sealed state, and airflow is used to prevent dust from entering from the observation port, thus ensuring the normal and safe operation of the instrument in harsh environments. The entire device is connected to the processing display and printing system in the control room through a cable. The system can be composed of two ways for users to choose first:
1. A dual-pen recorder with alarm is connected to record temperature and position signals. And can provide hot spot alarm.
2. Consists of a dedicated PC microcomputer and software system.
Specifications
This device is composed of scanning, detection and power supply. The detection part is composed of a probe (infrared radiation temperature detector) and a temperature transmitter.
Product technical data
1. Scanning detection system:
Measuring range: 0～600℃
Scanning range: 90°
Sampling speed: 10 times/sec
Sampling points: set by yourself
Detection distance: 9-20 meters (special requirements will be determined separately)
Detection target size: diameter 24 cm (at a distance of 9 meters)
diameter 58㎝ (at a distance of 20 meters)
Installation method: fixed installation
Electricity source: 220AC
Temperature signal measurement accuracy: 1.5 level (corresponding to the upper limit of the range)
Position signal measurement accuracy: 1.5 level (corresponding to the upper limit of the range)
Temperature signal output mode: 4～20mA (corresponding to 0～600℃ linear)
Position signal output mode: 4～20mA (corresponding to the linearity of the start and end positions)
2. Use recorder: record the position and temperature signal in real time, and alarm when a hot spot is formed.
3. Dedicated PC and printer
In addition to the functions of 2, it also has the following functions: color screen display temperature curve, kiln rotation speed, alarm time and hot spot location, memory historical data, and can increase the number of sampling detection channels for special requirements.
